DEMA has the ideal inline chemical injector to inject fluids or air into lines conveying water and other liquid under pressure. Injectors have no moving parts, nothing to wear out or lubricate, resulting in extremely low maintenance. They are compact, needing no foundation or mounting bracket, and can be installed in any position. Injectors require no wiring, are self-priming and need no bleeding or filling. Injection rate is simple to set and can be quickly adjusted during operation and there is nothing to drain for seasonal shut down.
Industrial Catalog
Brochure
Instruction Sheet
|
C Series Injectors
The “C” series injectors are supplied with 3 water nozzle bushings for accurate sizing of injector to water flow. They are equipped with a metering screw or use metering tips to adjust the dilution of the product. C Series injectors have a Ryton metering knob and check valve core for high chemical resistance and operate in pressure as high as 700 PSI (48 Bar) with water at room temperature or 500 PSI (34 Bar) with water at 150 degrees F (66 degrees C). A stainless steel metering knob is available for high pressure (700-3000 PSI or 48-204 Bar). A polypropylene model P203C is also available for high chemical resistance.
|
Industrial Catalog
Brochure
Instruction Sheet
|
B Series Injectors
The “B” series injectors are equipped with an adjustment screw to adjust water flow for the specific application and can use metering tips to adjust the dilution of the product. B Series injectors have a Ryton metering knob and check valve core for high chemical resistance and operate in pressure as high as 700 PSI (48 Bar) with water at room temperature or 500 PSI (34 Bar) with water at 150 degrees F (66 degrees C). A stainless steel metering knob is available for high pressure (700-3000 PSI or 48-204 Bar).
|